Magpow Shoe Neoprene Foam Contact Cement Glue Sole For Leather

Product Feature

Name Of ProductAppearanceViscosity(25℃,mPa.S)Solid Content(%)Peel Strength(25℃x48h,canvas-canvas N/2.5cm)Universal Decoration Adhesive(327)Light yellow thick liquid1500-2500≥45≥70Product Specification

Scope of Application

This product is mainly used in the daily repair. Such as repair of leather,rubber,wood,fabric,paper etc.
Applied to interior decoration, automotive interiors decoration, furniture and other industries. Also Adhesive to wood, MDF, fire board,aluminum composite panel, leather, rubber, fabric,paper and other materials. 

Directions

1.Adhesion surface should be oil decontamination and smooth,clean,dry.
2.Use scraper or brush with sticky material in the glue evenly on both sides if a large area bonding, it is proposed that coating the two adhesive surface at the same time.
3.Let it dry at room temperature 5-15 minutes, when the glue is not so sticky then drawing a one-time at the bonding, extrusion from the inside out to remove air bubbles,percussion compaction,it reach use strength after 24 hours. 

Exhibition

Production Line

Notice

1.Ventilation conditions in the use environment,and fireworks is strictly prohibited.
2.When opening the cover,use hand to hold down the voer in order to avoid glue's expansion because of the thermal emission.
3.cover tightly after use to prevent the volatile liquid become sticky.
4.Suitable for construction of the temperature above 15℃,no higher than 38℃,relative humidity less than 80%.
5.To avoid skin,eye contact, not entrance to mouth and prevent children's contact.
6.Please pre-tested before use in order to avoid errors.

Storage & Packing

1. Stock the fireproof contact cement in the air-tight seal at the temperature of 10-35℃. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life. 
2. Preserve and transport as flammable products.

Directions for Use

Carefully clean the surfaces be bonded, smear the glue on both surfaces, then wait for a while, about 10-18mins according to the room temperature joint the parts together and press them.

 

Our Company View

HUNAN MAGPOW ADHESIVE GROUP CO., LTD

Was founded in 1989, Leaders at all levels of care and guidance, in the community friends and the majority of customers with the help and support, has gone through more than 20 years of arduous pioneering and steady development process. Companies from the original workshop-style processing plant to national "Torch Plan" implementation of enterprises, national standards of enterprises, the state's key high-tech enterprises. Group assets worth 150 million.

 

Our Team

As the country's largest private enterprise adhesive technology research institute. The Research Institute covers an area of 3600 square meters. A total of five layers, Divided into 28 advanced equipment, full-featured professional laboratory. The company invested more than 1100 million one-time, And The introduction of more than 20 sets of world-class test and testing equipment from Germany and Taiwan. The Research Institute has made a number of international advanced level of scientific research and national invention patents. At present, the company is actively reporting to create a national technology research institute-Global Adhesive Laboratory.

 

Certificates

Market Distribution

After-Sales Service

Reply within 24 Hours

Professional consultation service is available within 24 hours after receiving your feedback regarding the iterms that you bought. Global Insurance Service

Global insurance service

guarantees the safety of iterms when installation and application.

Compensation Policy

Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.

Contact us, you will get more than what you see!