Description

OLVS188 High Temperature Reisitant Silicone Sealant is one part, with excellent resistance to temperature. Suitable for engine or generator bonding and sealing, good performance under oily environment.

Features

1. One component, ready to use; 

2. Oil resistance, withstand high vibration; 

3. Excellent adhesion for generator or engine; 

4. High temperature resistance, -40°C to 300°C.

Application

1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely 

clean and dry; 

2. For better appearance cover outside of joint areas with masking taps before application; 

3. Cut nozzle to desired size and extrudes sealant to joint areas; 

4. Tool immediately after sealant application and remove masking tape before sealant skins. 

Limitations

1. Unsuitable for curtain wall structural adhesive;

2. Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant; 

3. Unsuitable for the frosty or moist surface; 

4. Unsuitable for the continually soggy place; 

5. Can’t be used if the temperature is below 4°C or above 50°C on the surface of the material. 

Technology Data

The following data are only for reference purpose, not intended for use in preparing specification.

Regular Colors

Red Color

Cartridge(300ml, 260ml, 230ml)

200L Drum(Barrel)

Around 15 days upon down payment and confirmation of design for cartridge and carton by customer

Certificates

Olivia Factory