Hybrid All MS Adhesive Sealant
SAINT-GOBAIN JOINLEADER (HANGZHOU) NEW MATERIALS CO., LTD.
See what’s includedHide breakdown
- FOB goods (1,000)
- $1,050
- Ocean freight + handling (0.26 CBM, volume guessed from price)
- $820
- US duty (3.5%)
- $37
- Section 301 tariff (25.0%)
- $263
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (1,000)
- $1,050
- Ocean freight + handling (0.26 CBM, volume guessed from price)
- $820
- US duty (3.5%)
- $37
- Section 301 tariff (25.0%)
- $263
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if unreachable
Hybrid All MS Adhesive Sealant
SAINT-GOBAIN JOINLEADER (HANGZHOU) NEW MATERIALS CO., LTD.See what’s includedHide breakdown
- FOB goods (1,000)
- $1,050
- Ocean freight + handling (0.26 CBM, volume guessed from price)
- $820
- US duty (3.5%)
- $37
- Section 301 tariff (25.0%)
- $263
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (1,000)
- $1,050
- Ocean freight + handling (0.26 CBM, volume guessed from price)
- $820
- US duty (3.5%)
- $37
- Section 301 tariff (25.0%)
- $263
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if unreachable
About this product
- Materials: STP-E,FILLER
- Size: 230*40*40
- Color: WHITE,GREY,BLACK
- Exports to: Mainland China, Africa, Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Japan and South Korea, Hong Kong China, Macao China and Taiwan China, Others
- Made in: Zhejiang, China
About this product
- Materials: STP-E,FILLER
- Size: 230*40*40
- Color: WHITE,GREY,BLACK
- Exports to: Mainland China, Africa, Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Japan and South Korea, Hong Kong China, Macao China and Taiwan China, Others
- Made in: Zhejiang, China
Product details
| Materials | STP-E,FILLER |
|---|---|
| Size | 230*40*40 |
| Color | WHITE,GREY,BLACK |
Product details
| Materials | STP-E,FILLER |
|---|---|
| Size | 230*40*40 |
| Color | WHITE,GREY,BLACK |
From the supplier
Widely bonded to various materials such as metal, lacquer, plastic, wood, etc.
Strong yet flexible
Anti-vibration, fatigue resistance
Waterproof
Easy to use
Eco-friendly, tin- and plasticizer-free
PRODUCT DESCRIPTION
1.
It is a one-component adhesive based on hybrid silicone polymer, which can be cured by reacting with moisture in the air and gradually form a high-strength elastomer.
2.
It bonds most materials easily, such as rubber, glass, copper, aluminum, steel and most plastics, it even bonds unlike materials to one another such as glass to aluminum or rubber to metal.
3.
It combines instant adhesion and high bonding strength.
4.
It is a multi-purpose high-quality silicone, it can bonding mirror to painted surfaces, plaster, metal, or wood.
5.
It is specially designed for mirror installation, it's also a good choice for window & door, DIY, etc.
6.
It meets the requiements of CE, FDA, ASTM C920 and ISO 11600.
TYPICAL APPLICATIONS
1.
It is suit for both interior and exterior.
2.
It is a quick and durable bond for home decoration, especially for bath and kitchen purposes.
3.
It is a fast setting adhesive ideal for bonding varies materials and preassembled parts.
FEATURE
1.
Excellent adhesion to various substrates, such as metal, lacquer, plastic, wood, etc.
2.
Strong yet flexible
3.
Good vibration & fatigue resistance
4.
Waterproof
5.
Easy to use
6.
Eco-friendly, tin- and plasticizer-free
TECHNICAL FEATURES
Items
C*a/T*b/S*c/O*d
Unit
Typical Value
Requirement
Test Std
Eqv. Std
Appearance
/
/
Fine, uniform paste
By eyes
Density
g/cm3
1.58
1.58±0.10
GB/T 13477.2
Tack free
///Finger
min
17
≤30
GB/T 13477.5
ASTM D2377:2000
Sagging
mm
0
≤1
GB/T 13477.6
ISO 7390:1987
Solid Content
%
98.5
≥93.0
GB/T 2793
JIS K6833:1980
Hardness, Shore A
7d///
/
34
30~45
GB/T 531.1
ISO 7619-1:2004
Curing Depth
24h///
mm
2.3
≥2.0
GB/T 32369
7d///
mm
5.8
≥5.0
GB/T 32369
Elongation at break
7d///
%
760
≥500
GB/T 528
ISO 37:2005
Tensile Strength
7d///
MPa
1.48
≥1.2
GB/T 528
ISO 37:2005
Notes:
*a, Conditioning, specimen is conditioned under (23±2) ºC, (50±5)% relative humidity if not specified;
*c, Substrate
*b, Testing Condition, specimen is tested at (23±2) ºC, (50±5)% relative humidity if not specified;
*d, Others need to be specified.
The above data is intended to provide guidance for use and should not be used to write product specifications
DIRECTIONS FOR USE
1.
Surface must be clean, dry and free from grease and old glue. Mask smooth surface to simplify clean up. Apply to one surface only.
2.
Apply to one surface, using 1 drop per square inch of surface.
3.
Assemble parts and hold together with pressure for few minutes or until set.
4.
Apply suitable pressure on bonding substrates. Clean off excess adhesive with acetone.
From the supplier
Widely bonded to various materials such as metal, lacquer, plastic, wood, etc.
Strong yet flexible
Anti-vibration, fatigue resistance
Waterproof
Easy to use
Eco-friendly, tin- and plasticizer-free
PRODUCT DESCRIPTION
1.
It is a one-component adhesive based on hybrid silicone polymer, which can be cured by reacting with moisture in the air and gradually form a high-strength elastomer.
2.
It bonds most materials easily, such as rubber, glass, copper, aluminum, steel and most plastics, it even bonds unlike materials to one another such as glass to aluminum or rubber to metal.
3.
It combines instant adhesion and high bonding strength.
4.
It is a multi-purpose high-quality silicone, it can bonding mirror to painted surfaces, plaster, metal, or wood.
5.
It is specially designed for mirror installation, it's also a good choice for window & door, DIY, etc.
6.
It meets the requiements of CE, FDA, ASTM C920 and ISO 11600.
TYPICAL APPLICATIONS
1.
It is suit for both interior and exterior.
2.
It is a quick and durable bond for home decoration, especially for bath and kitchen purposes.
3.
It is a fast setting adhesive ideal for bonding varies materials and preassembled parts.
FEATURE
1.
Excellent adhesion to various substrates, such as metal, lacquer, plastic, wood, etc.
2.
Strong yet flexible
3.
Good vibration & fatigue resistance
4.
Waterproof
5.
Easy to use
6.
Eco-friendly, tin- and plasticizer-free
TECHNICAL FEATURES
Items
C*a/T*b/S*c/O*d
Unit
Typical Value
Requirement
Test Std
Eqv. Std
Appearance
/
/
Fine, uniform paste
By eyes
Density
g/cm3
1.58
1.58±0.10
GB/T 13477.2
Tack free
///Finger
min
17
≤30
GB/T 13477.5
ASTM D2377:2000
Sagging
mm
0
≤1
GB/T 13477.6
ISO 7390:1987
Solid Content
%
98.5
≥93.0
GB/T 2793
JIS K6833:1980
Hardness, Shore A
7d///
/
34
30~45
GB/T 531.1
ISO 7619-1:2004
Curing Depth
24h///
mm
2.3
≥2.0
GB/T 32369
7d///
mm
5.8
≥5.0
GB/T 32369
Elongation at break
7d///
%
760
≥500
GB/T 528
ISO 37:2005
Tensile Strength
7d///
MPa
1.48
≥1.2
GB/T 528
ISO 37:2005
Notes:
*a, Conditioning, specimen is conditioned under (23±2) ºC, (50±5)% relative humidity if not specified;
*c, Substrate
*b, Testing Condition, specimen is tested at (23±2) ºC, (50±5)% relative humidity if not specified;
*d, Others need to be specified.
The above data is intended to provide guidance for use and should not be used to write product specifications
DIRECTIONS FOR USE
1.
Surface must be clean, dry and free from grease and old glue. Mask smooth surface to simplify clean up. Apply to one surface only.
2.
Apply to one surface, using 1 drop per square inch of surface.
3.
Assemble parts and hold together with pressure for few minutes or until set.
4.
Apply suitable pressure on bonding substrates. Clean off excess adhesive with acetone.
About the supplier
Main products: Other organic compounds
- ✓Exhibited at 10 of the last 10 Canton Fairs
- ✓Industry and Trade Company
- ✓Founded 2018
- ✓CF Award winner
- ✓Brand exhibitor
- Exhibited at 10 of the last 10 Canton Fairs
- Industry and Trade Company
- Founded 2018
- CF Award winner
Similar products from other suppliers
