Product Introduction

Bromine-based fungicide Power Brom has a good effect on killing bacteria, fungi and algae, as well as a strong control and stripping ability on biological slime and biofilm; it is suitable for high pH water bodies; as a liquid stabilized bromine based biocide, it completely overcomes the shortcomings of existing bromine biocide products in the market in terms of cost, stability, safety and convenience, and can completely replace chlorine, NaCLO and other common oxidizing biocides.

Technical indicators

Appearance: Orange liquid

Flavor Slightly: sweet and fragrant

Active content: 20（% as Br2）

Density: 1.4±0.1(20℃, g/cm3)

PH: 13

Product usage

Bromine-based fungicide Power Brom can be widely applied in the industrial circulating water and cooling water systems, industrial once-through water system, municipal/industrial wastewater treatment system, municipal/ industrial wastewater reuse system and pulp water treatment system of paper mills as disinfectant, bactericide, algaecide, or slime stripper, for bacteria, algae and slime control of other water systems.

Method of use

Bromine-based fungicide Power Brom can be used by continuous, intermittent or impact addition, with a concentration of 30-50 mg/L When it is added continuously, the residual bromine (chlorine) in the water shall be controlled to 0.1-0.3 mg/L; in time of impact addition, the residual bromine (chlorine) in the water shall be kept at 0.2-0.3 mg/L. mg/l for 4-6 hours to achieve a good effect of killing microorganisms; when it is used for slime stripping, the concentration is 200-400 mg/L, and the residual bromine in the water is kept above 0.3 mg/L for 24-36 hours, which can effectively strip the biological slime.

Package and storage

Packed in 200kg or 1000kg IBC polypropylene plastic drums; protected from sun and rain during transportation; stored in ventilated and dry place below 40℃; avoid freezing, heating or direct sunlight. The shelf life of the product is six months under the required storage conditions.