Marble Adhesive is made up of high standard unsaturated polyester resin, It can be used for bonding all king of marble, stone and granite, also can be used for mending of seams or dents of the surface on the marble products. The products are easy for operation and with high intensity characteristic, can be used for polishing after been cured.

Main composition

Unsaturated Polyester Resin, filling powder, peroxide

Colors:

Transparent, Beige, Cream, White, Red, etc

Direction For Use.

Keep the application surface dry and clean

The ratio between Part A (marble adhesive) and Part B (Hardener) is 100: 3,

If the end user wants to expedite or slow down the curing time, they can increase or reduce the quantity of Part B (Hardener), but too much Part B (Hardener) may change the color of the adhesive after its cured.

Mix thoroughly and apply with facer.

Attention

Do not return the mixed glue to the original packing, close the cover when store in cool, ventilate and dry place, away from the heat & kindling.

Do not operate in wet circumstance or it will cause sticky on the surface.

Working temperature arranges from -10℃ to 45℃.

Over dosed hardener (more than 3%) may cause the color change of the colloid and reduction of adhesion.

High temperature (℃) may cause the color change and reduction of adhesion .

Do not use the marble adhesive for structural adherence, for dry-hanging of stones purpose, please use our epoxy base AB adhesive.

Do not exposure to wetting and freezing temperature too much.