Description

One-component coating,coating color like the galvanized parts with a high gloss silver.Outdoor exposure film and galvanized parts have the same color changes.Used for hot dip galvanized component finish of patches,hardware and mechanical components of hot dip galvanized,not easy to hot dip galvanized corrosion protection and decoration such as processing and other large components.

Features

1.One-component galvanized color coating,simple operation,no mixing process,not limited by use of time;2.Room temperature as long as the spray,can get similar to hot dip galvanized processing mirror effect;3.This product atomization effect is good,good

adhesion,only a thin layer has good covering effect; 4.Also need anticorrosive effect and surface effect,it is recommended that the first spray can free cold galvanizing as primer,paint spraying zinc agent again can.

Method

1.To remove surface dust,grease,rust,and old coating;2.Up and down shaking jar,heard the glass bead noise to shake after more than 30 times,to ensure the paint fully shake;3.When spraying coating surface 25~30 cm,press the nozzle spray back and forth;4.To prevent hush,inverted jar under pressure after spraying nozzle about 3 seconds,remove the nozzle more than expected,in case of hush.

Attention

• 1. Use in a well-ventilated place;2.Pay attention to when using completes the protective measures,wear protective goggles and respirators,protective gloves,etc.3.Away from heat,sparks,open flames,hot surfaces;4.Don't eat drink,smoking in the workplaces.