Fengfa Technology's switched reluctance speed control motor system products have the characteristics of high system efficiency, strong overload capacity, large starting torque, small starting current, frequent start stop and forward/reverse switching. The products have high efficiency, energy saving, high reliability, and a wide range of high-efficiency operation speed control in industrial dynamic scenarios. They can be widely used in the metallurgical industry (mixers, fans, industrial pumps, flotation machines, air compressors, cooling tower fans, etc.), petrochemical machinery equipment (pumping machines), textile machinery, forging/stamping machinery equipment and other industrial transmission fields. According to customer needs, customized functions such as brake power generation, direct drive starting, low-voltage ride through and speed tracking starting can be achieved. Compared with three-phase asynchronous motors, Fengfa Technology's switched reluctance speed control motor system products The comprehensive energy-saving rate is over 15%.

System advantages:

● High system efficiency
The switched reluctance speed regulation motor system maintains high efficiency output within its wide speed regulation range, which is more pronounced compared to other speed regulation systems at low speeds and low load rates. The overall efficiency is higher than that of other speed regulation systems

His speed control system is 5% -15% higher.

● Wide speed range
The switched reluctance speed regulating motor system can operate under load for a long time within the range of limited minimum speed to 1.5 times the rated speed.

● No impact starting current
The switched reluctance motor system has soft start characteristics, where the starting current smoothly increases to the required current. The longer the set motor starting time, the smaller the impulse current.

High starting torque, low starting current
When the starting torque of the switched reluctance motor system reaches the rated torque, the starting current is only 30% of the rated current.

● Can frequently start and stop, and switch between forward and reverse rotation
The switched reluctance motor system can start and stop frequently, and switch between forward and reverse directions frequently. There is no strict limit on the number of start stop and forward/reverse switching times when there is a braking unit and the braking power meets the time requirements.

● Have a comprehensive protection mechanism

Including more than 30 types of fault protection such as drive failure, overcurrent, overvoltage, undervoltage, overheating, loss of position signal, motor phase loss, input power phase loss, phase current imbalance, etc.

● Strong overload capacity
Can run for 60 seconds at 1.5 times the load.

The motor structure is simple, sturdy, and highly reliable
The rotor of the electric motor has no winding and squirrel cage bars, and its mechanical strength and reliability are higher than other types of motors. The stator coil is easy to embed, with short and firm ends, and most of the heat consumption is in the stator, making it easy to cool and allowing for higher temperature rise without affecting motor performance.