16 Gauge 2-1/2-Inch Straight Finish Nailer T64RA
ZHEJIANG RONGPENG AIR TOOLS CO., LTD.
See what’s includedHide breakdown
- FOB goods (100)
- $14
- Ocean freight + handling (0.40 CBM)
- $820
- US duty (4.0%)
- $0.56
- Section 301 tariff (25.0%)
- $3.47
- Customs fees (MPF/HMF)
- $33
Estimate in USD to a US port using category averages (HTS 8201-8207/8467), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $14
- Ocean freight + handling (0.40 CBM)
- $820
- US duty (4.0%)
- $0.56
- Section 301 tariff (25.0%)
- $3.47
- Customs fees (MPF/HMF)
- $33
Estimate in USD to a US port using category averages (HTS 8201-8207/8467), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
16 Gauge 2-1/2-Inch Straight Finish Nailer T64RA
ZHEJIANG RONGPENG AIR TOOLS CO., LTD.See what’s includedHide breakdown
- FOB goods (100)
- $14
- Ocean freight + handling (0.40 CBM)
- $820
- US duty (4.0%)
- $0.56
- Section 301 tariff (25.0%)
- $3.47
- Customs fees (MPF/HMF)
- $33
Estimate in USD to a US port using category averages (HTS 8201-8207/8467), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $14
- Ocean freight + handling (0.40 CBM)
- $820
- US duty (4.0%)
- $0.56
- Section 301 tariff (25.0%)
- $3.47
- Customs fees (MPF/HMF)
- $33
Estimate in USD to a US port using category averages (HTS 8201-8207/8467), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
From the supplier
T64RA G16 1.6x1.4mm diameter, T nails, 100 nails
1. Nail head and striker are heat treated by German Ipsen, high strength and wear resistance
2. The life of the firing pin exceeds 200,000 times.
3. The nailing rate can be said to be about 0.03%, and the nailing speed is faster than the same type of nail gun
4. Aviation grade bumper bumper wear resistance
5. The safety frame can be triggered only when it reaches twice the weight of the gun body, to ensure that the use of safety will not trigger accidents
6. Sequential fire with one-click continuous play function
7. High-strength engineering plastic clips are wear-resistant
8. The gasket never wears out and does not need to be replaced
9. The handle sheath TPE material is soft and will not freeze and crack
10. At the same time, our gun body is a high-strength aluminum alloy die-cast gun body, the whole gun is durable and not afraid of falling or low temperature
11. Quick release jammed nail device, you can immediately remove the stuck nails to ensure efficiency
From the supplier
T64RA G16 1.6x1.4mm diameter, T nails, 100 nails
1. Nail head and striker are heat treated by German Ipsen, high strength and wear resistance
2. The life of the firing pin exceeds 200,000 times.
3. The nailing rate can be said to be about 0.03%, and the nailing speed is faster than the same type of nail gun
4. Aviation grade bumper bumper wear resistance
5. The safety frame can be triggered only when it reaches twice the weight of the gun body, to ensure that the use of safety will not trigger accidents
6. Sequential fire with one-click continuous play function
7. High-strength engineering plastic clips are wear-resistant
8. The gasket never wears out and does not need to be replaced
9. The handle sheath TPE material is soft and will not freeze and crack
10. At the same time, our gun body is a high-strength aluminum alloy die-cast gun body, the whole gun is durable and not afraid of falling or low temperature
11. Quick release jammed nail device, you can immediately remove the stuck nails to ensure efficiency
About the supplier
Main products: Pneumatic tools, Water nozzle, Metal paint mixer, Polisher, Polishing floor pad, Sander, Sand disc, Nail-gun, Electric wrench, Inflator gun, Air blow gun, Other Power Tools
- ✓Exhibited at 10 of the last 10 Canton Fairs
- ✓Manufacturer
- ✓Founded 2000
- ✓Canton Fair Premium Supplier
- ✓Brand exhibitor
- ✓National high-tech enterprise
- ✓1 certificate on file
Hardware & Tools exhibitors show in Phase 1 of the Canton Fair, 15 to 19 October 2026.
- Exhibited at 10 of the last 10 Canton Fairs
- Manufacturer
- Founded 2000
- Canton Fair Premium Supplier
More from ZHEJIANG RONGPENG AIR TOOLS CO., LTD.
Similar products from other suppliers
