The PainFree Model Ease is a wearable health care product, using 660nm red spectrum technology and deep 880nm infrared LED light energy to activate cells production and blocks pain-transmitting chemicals to relief pain and discomfort associated with sports injuries.

• Red LED Light 660nm*

660nm LED Red Light is effective for increasing blood flow, pain management, wound and bruise healing, relax the muscles in order to reduce pain.

• Infrared Light 880nm*

880nm Infrared thermal radiation can penetrate deeply into the skin, provide muscle heating, stimulate blood circulation and warm the muscles. After smoothing the muscle it will get rid of toxins and makes your joints more flexible.

In addition, it helps to promote blood circulation, accelerate metabolism, relax muscles, relieve pain, and increase joint flexibility for multiple health benefits.

• Special Note Regarding Infrared Light

Infrared light is mostly not visible for the human eye. The wavelength of infrared the product uses is 880nm, meaning that some of the light is invisible. When the light is on, there is a red glow that can be seen at the center of the LED. This red glow is more visible in darker conditions and will be less visible under bright light.

Barolet, D. (2008). Light-Emitting Diodes (LEDs) in Dermatology. Seminars in Cutaneous Medicine and Surgery, 27(4), pp.227-238.

*Reference

Spinoff. (2005). Washington, D.C.: National Aeronautics and Space Administration, Innovative Partnerships Program, p.7.

Nasa.gov. (2018). NASA - NASA Light-Emitting Diode Technology Brings Relief In Clinical Trials. [online] Available at: https://www.nasa.gov/home/hqnews/2003/nov/HQ_03366_clinical_trials_prt.htm [Accessed 22 Mar. 2018].

• Specification

Wavelength: LED Red Light 660nm, Infrared Light: 880nm

Treatment time: 3 minutes

Dimensions: 110mm x 85mm x 31mm

Net Weight: 220g

Power supply: DC: 5V/1A

Battery: Lithium Battery 3.7V, 2200 mAh

Charging Time: 3.5 hours

Auto Switch Off: 3 minutes

Accessories: Magnet U, Armband, Waistband, Storage Bag, AC Adaptor, USB Cable, User Manual, Warranty Card

HOW TO USE

● Using Magnet U (Suitable for any body parts)

1. Place the product discreetly under your clothes. (Picture 1)

2. Make sure the product is located on the area to be treated and the LED area is in contact with the skin.

3. Press the On/Off button.

4. Put the “Magnet U” onto your clothes to the corresponding position to stable the product. (Picture 2)

5. Once the treatment ends, it automatically switches off with a “beep” sound.

Picture 1

● Using the Armband (Suitable for arms/ legs etc.)

1. Put the device into the “H” frame

2. Pass the velcro strap through gap A.

3. Place the armband in the position of use and ensure the device’s LED area is in contact with the skin.

4. Gently tighten the velcro strap (should not be too loose or too tight).

5. Pass the velcro strap through gap B.

6. Fasten the velcro strap to secure the armband.

7. Press the On/Off button.

8. Once the treatment ends, it automatically switches off with a “beep” sound.

9. Loosen the strap and remove it from your body and remove the device from the “H” frame.

PICTURE 2

● Using the Waistband (Suitable for arms/ legs etc.)

1. Put the product into the waistband

2. Make sure that the LED area is not covered by the material of the band. If necessary, shift the device a little.

3. Make sure the product is located on the area to be treated and the LED area is in contact with the skin

4. Wrap the waistband with the product there in around the corresponding position (such as your waist).

5. Fasten the waistband with the velcro strips on both end of the waistband.

6. Press the On/Off button.

7. Once the treatment ends, it automatically switches off with a “beep” sound.

8. Loosen the waistband and remove it from your body and remove the product from the “H” frame.