Machine tool
RAYMAX 135T/3200 Hydraulic CNC Press Brake with DA66T 6+1 Axis
anhui zhongrui machine manufacturing co.,ltd10/10 fairsManufacturerModel RX-S 135T/3200
$33,65000–$39,25000/ unit FOB
Unit not stated by the supplier (piece, set, box); we confirm it when we get the quote.
MOQ 1 unit
Estimated landed cost
$46,903 / unit
range $43,302–$50,505 · total ≈ $4,690,316
See what’s includedHide breakdown
- FOB goods (100)
- $3,645,000
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $127,575
- Section 301 tariff (25.0%)
- $911,250
- Customs fees (MPF/HMF)
- $5,191
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $3,645,000
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $127,575
- Section 301 tariff (25.0%)
- $911,250
- Customs fees (MPF/HMF)
- $5,191
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
RAYMAX 135T/3200 Hydraulic CNC Press Brake with DA66T 6+1 Axis
anhui zhongrui machine manufacturing co.,ltd10/10 fairsManufacturerModel RX-S 135T/3200
$33,65000–$39,25000/ unit FOB
Unit not stated by the supplier (piece, set, box); we confirm it when we get the quote.
MOQ 1 unit
Estimated landed cost
$46,903 / unit
range $43,302–$50,505 · total ≈ $4,690,316
See what’s includedHide breakdown
- FOB goods (100)
- $3,645,000
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $127,575
- Section 301 tariff (25.0%)
- $911,250
- Customs fees (MPF/HMF)
- $5,191
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $3,645,000
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $127,575
- Section 301 tariff (25.0%)
- $911,250
- Customs fees (MPF/HMF)
- $5,191
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
About this product
- Materials: steel plate
- Size: 3900*1800*2680
- Color: customized
- Waterproof rating: Other
- Automatic grade: Other
- Warranty: 2-year
- Exports to: Africa, Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Others
- Made in: Anhui, China
About this product
- Materials: steel plate
- Size: 3900*1800*2680
- Color: customized
- Waterproof rating: Other
- Automatic grade: Other
- Warranty: 2-year
- Exports to: Africa, Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Others
- Made in: Anhui, China
Product details
| Materials | steel plate |
|---|---|
| Size | 3900*1800*2680 |
| Color | customized |
| Waterproof rating | Other |
| Automatic grade | Other |
| Warranty | 2-year |
| Suitable for | AluminumOther |
Product details
| Materials | steel plate |
|---|---|
| Size | 3900*1800*2680 |
| Color | customized |
| Waterproof rating | Other |
| Automatic grade | Other |
| Warranty | 2-year |
| Suitable for | AluminumOther |
From the supplier
RAYMAX CNC Hydraulic Press Brake WF67K-135T/3200 with DA66T 6+1 Axis
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Featuring a new rigid design and finite element optimization analysis, the CNC press brake ensures excellent rigidity and stability, reducing the impact of bending deformation on the workpiece quality and maintaining high machining accuracy.
2. The hydraulic press brake machine is equipped with a fully closed-loop electro-hydraulic servo synchronization control system, imported from Rexroth, Germany, for precise feedback synchronization.
3. Designed with a minimalist aesthetic, the hydraulic press brake machine boasts a sleek and simple appearance. It undergoes a sandblasting process for rust removal and is coated with anti-rust paint for enhanced durability.
4. The quick clamping structure of the press brake improves mold replacement speed, boosting work efficiency. Molds can be installed and removed by pulling the red handle, enabling easy access from both the left and right.
5. The CNC hydraulic press brake features adjustable controls in four directions (X, Y, R, Z), enabling precise bending operations and balancing control functionality.
6. Equipped with a deflection compensation device, the press brake ensures accurate parts processing through angle compensation, length compensation, and gap error correction. This device enhances the overall precision of the workpieces.
Detail Images
1. DELEM DA66T
*17" high resolution colour TFT
*2D graphical touch screen programming mode
*3D visualisation in simulation and production
*Profile-T2D offline software
2. Servo Motor
Compared with the main motor, it is more energy-efficient and reduces consumption. Reduce noise pollution and improve work efficiency.
3. Crowning system
With CNC crowning systems the press brake control is preprogrammed with machine characteristics and deflection data.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Fast Clamping
The fast clamp is convenient and efficient, which can greatly improve the efficiency in the process of assembly line operation.
6. 6 Axis Control
（X,R,Z1,Z2）
*Ball screws and linear guide on X, R-axis
*Precision belts and YYC rack on axes Z1-Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Featuring a new rigid design and finite element optimization analysis, the CNC press brake ensures excellent rigidity and stability, reducing the impact of bending deformation on the workpiece quality and maintaining high machining accuracy.
2. The hydraulic press brake machine is equipped with a fully closed-loop electro-hydraulic servo synchronization control system, imported from Rexroth, Germany, for precise feedback synchronization.
3. Designed with a minimalist aesthetic, the hydraulic press brake machine boasts a sleek and simple appearance. It undergoes a sandblasting process for rust removal and is coated with anti-rust paint for enhanced durability.
4. The quick clamping structure of the press brake improves mold replacement speed, boosting work efficiency. Molds can be installed and removed by pulling the red handle, enabling easy access from both the left and right.
5. The CNC hydraulic press brake features adjustable controls in four directions (X, Y, R, Z), enabling precise bending operations and balancing control functionality.
6. Equipped with a deflection compensation device, the press brake ensures accurate parts processing through angle compensation, length compensation, and gap error correction. This device enhances the overall precision of the workpieces.
Detail Images
1. DELEM DA66T
*17" high resolution colour TFT
*2D graphical touch screen programming mode
*3D visualisation in simulation and production
*Profile-T2D offline software
2. Servo Motor
Compared with the main motor, it is more energy-efficient and reduces consumption. Reduce noise pollution and improve work efficiency.
3. Crowning system
With CNC crowning systems the press brake control is preprogrammed with machine characteristics and deflection data.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Fast Clamping
The fast clamp is convenient and efficient, which can greatly improve the efficiency in the process of assembly line operation.
6. 6 Axis Control
（X,R,Z1,Z2）
*Ball screws and linear guide on X, R-axis
*Precision belts and YYC rack on axes Z1-Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
From the supplier
RAYMAX CNC Hydraulic Press Brake WF67K-135T/3200 with DA66T 6+1 Axis
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Featuring a new rigid design and finite element optimization analysis, the CNC press brake ensures excellent rigidity and stability, reducing the impact of bending deformation on the workpiece quality and maintaining high machining accuracy.
2. The hydraulic press brake machine is equipped with a fully closed-loop electro-hydraulic servo synchronization control system, imported from Rexroth, Germany, for precise feedback synchronization.
3. Designed with a minimalist aesthetic, the hydraulic press brake machine boasts a sleek and simple appearance. It undergoes a sandblasting process for rust removal and is coated with anti-rust paint for enhanced durability.
4. The quick clamping structure of the press brake improves mold replacement speed, boosting work efficiency. Molds can be installed and removed by pulling the red handle, enabling easy access from both the left and right.
5. The CNC hydraulic press brake features adjustable controls in four directions (X, Y, R, Z), enabling precise bending operations and balancing control functionality.
6. Equipped with a deflection compensation device, the press brake ensures accurate parts processing through angle compensation, length compensation, and gap error correction. This device enhances the overall precision of the workpieces.
Detail Images
1. DELEM DA66T
*17" high resolution colour TFT
*2D graphical touch screen programming mode
*3D visualisation in simulation and production
*Profile-T2D offline software
2. Servo Motor
Compared with the main motor, it is more energy-efficient and reduces consumption. Reduce noise pollution and improve work efficiency.
3. Crowning system
With CNC crowning systems the press brake control is preprogrammed with machine characteristics and deflection data.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Fast Clamping
The fast clamp is convenient and efficient, which can greatly improve the efficiency in the process of assembly line operation.
6. 6 Axis Control
（X,R,Z1,Z2）
*Ball screws and linear guide on X, R-axis
*Precision belts and YYC rack on axes Z1-Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Featuring a new rigid design and finite element optimization analysis, the CNC press brake ensures excellent rigidity and stability, reducing the impact of bending deformation on the workpiece quality and maintaining high machining accuracy.
2. The hydraulic press brake machine is equipped with a fully closed-loop electro-hydraulic servo synchronization control system, imported from Rexroth, Germany, for precise feedback synchronization.
3. Designed with a minimalist aesthetic, the hydraulic press brake machine boasts a sleek and simple appearance. It undergoes a sandblasting process for rust removal and is coated with anti-rust paint for enhanced durability.
4. The quick clamping structure of the press brake improves mold replacement speed, boosting work efficiency. Molds can be installed and removed by pulling the red handle, enabling easy access from both the left and right.
5. The CNC hydraulic press brake features adjustable controls in four directions (X, Y, R, Z), enabling precise bending operations and balancing control functionality.
6. Equipped with a deflection compensation device, the press brake ensures accurate parts processing through angle compensation, length compensation, and gap error correction. This device enhances the overall precision of the workpieces.
Detail Images
1. DELEM DA66T
*17" high resolution colour TFT
*2D graphical touch screen programming mode
*3D visualisation in simulation and production
*Profile-T2D offline software
2. Servo Motor
Compared with the main motor, it is more energy-efficient and reduces consumption. Reduce noise pollution and improve work efficiency.
3. Crowning system
With CNC crowning systems the press brake control is preprogrammed with machine characteristics and deflection data.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Fast Clamping
The fast clamp is convenient and efficient, which can greatly improve the efficiency in the process of assembly line operation.
6. 6 Axis Control
（X,R,Z1,Z2）
*Ball screws and linear guide on X, R-axis
*Precision belts and YYC rack on axes Z1-Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
About the supplier
anhui zhongrui machine manufacturing co.,ltd
Main products: Press brake,Hydraulic press machine,Punching And Shearing Machine,Power press,Other Large Machinery u0026 Equipment
- ✓Exhibited at 10 of the last 10 Canton Fairs
- ✓Manufacturer
- ✓Founded 2002
Manufacturing exhibitors show in Phase 1 of the Canton Fair, 15 to 19 October 2026.
75
trust
- Exhibited at 10 of the last 10 Canton Fairs
- Manufacturer
- Founded 2002
Canton Fair booth: 19.1H24-25 · Large Machinery & Equipment (140th session)
More from anhui zhongrui machine manufacturing co.,ltd
Hydraulic CNC servo press brake with DA53T
$13,000.00–$20,000.00 / unit FOB
~$21242.47 landed · 100 pcs
Hydraulic CNC servo press brake with CT8
$9,300.00–$12,000.00 / unit FOB
~$13717.91 landed · 100 pcs
RAYMAX 400T/4000 Hydraulic CNC Press Brake with DA69S 8+1 Axis
$81,000.00–$93,250.00 / unit FOB
~$112083.88 landed · 100 pcs
RAYMAX 125T/3200 Hydraulic CNC Press Brake with ESA 875 4+1 Axis
$22,400.00–$28,000.00 / unit FOB
~$32432.85 landed · 100 pcs
RAYMAX 125T/3200 CNC Servo Press Brake with DA53T 4+1 Axis
$22,400.00–$28,000.00 / unit FOB
~$32432.85 landed · 100 pcs
RAYMAX 160T/3200 Hydraulic CNC Press Brake with DA66T 4+1 Axis
$32,910.00–$39,110.00 / unit FOB
~$46337.21 landed · 100 pcs
RAYMAX 125T/3200 Hydraulic CNC Press Brake with ESA 875 6+1 Axis
$29,000.00–$35,000.00 / unit FOB
~$41179.35 landed · 100 pcs
RAYMAX 125T/3200 Hydraulic CNC Press Brake with ESA 875 8+1 Axis
$34,000.00–$40,000.00 / unit FOB
~$47610.60 landed · 100 pcs
Similar products from other suppliers
Shearing machine
$8,100.00–$52,000.00 / unit FOB
~$38671.16 landed · 100 pcs
2020 New metal shearing machine for sale
$8,100.00–$52,000.00 / unit FOB
~$38671.16 landed · 100 pcs
NC Press Brake E300 System
$8,000.00–$30,000.00 / unit FOB
~$24458.10 landed · 100 pcs
New
CNC Lighting Pole Tandem Bending Machine
$20,000.00–$300,000.00 / unit FOB
~$205819.35 landed · 100 pcs
Big Type Hydraulic Shearing Machine
$8,100.00–$52,000.00 / unit FOB
~$38671.16 landed · 100 pcs
NC Press Brake with E300
$8,000.00–$30,000.00 / unit FOB
~$24458.10 landed · 100 pcs
Hydraulic torsion synchronized press brake
$10,000.00–$200,000.00 / unit FOB
~$135075.60 landed · 100 pcs
CNC Press Brake
$33,900.00–$50,000.00 / unit FOB
~$53977.53 landed · 100 pcs
$33650.00–$39250.00 / unit
MOQ 1 · Verify for $29